SG24 3-Point PTO Stump Grinder - 24 in Flywheel, 34 Carbide Teeth, 15-45 HP Tractors
Bolt it to the tractor you already own. A 24 inch solid steel flywheel with 34 carbide teeth grinds a hardwood stump 6 inches below grade in minutes. Cat. 1 hitch, 540 RPM PTO, slip-clutch shaft included.
- 24 in x 3/4 in solid steel flywheel
- 34 tungsten carbide teeth in 42CrMo holders
- PTO shaft with slip clutch included
- Cat. 1 3-point hitch, quick-attach compatible
- Grinds 6 in below grade
- 1-year warranty - real U.S.-based support
The numbers that matter
Built to work, priced to own.
Six reasons the SG24 out-grinds a weekend rental and stays on your tractor.
24 inch flywheel
A large, 3/4 inch thick solid steel wheel carries the momentum to keep cutting through knots and roots without stalling the tractor.
34 carbide teeth
YG11C tungsten carbide tips in forged 42CrMo holders cut fast, stay sharp and are replaced one at a time when they finally wear.
Slip-clutch PTO shaft
The 1-3/8 in 6-spline shaft ships in the crate and protects your tractor's PTO from shock loads when a tooth hits rock.
Sized for compact tractors
Rated for 15 to 45 PTO horsepower and 1,200 Nm, so a sub-compact or compact tractor runs it all day.
Cat. 1 3-point hitch
The rigid 3-point connection keeps the grinder stable under load and improves grinding efficiency. Quick-attach compatible.
Everything on the unit
Chainsaw holder, tool and manual bucket and integrated stabilizing legs for storage and one-person hookup.
Real work, real jobsites.
Stumps gone, ground ready to seed
Grind the stump and the root crown 6 inches below grade, then drive the tractor over the spot.
Three pins and a PTO shaft
Back up, drop the hitch pins, connect the 540 RPM shaft and you are grinding in five minutes.
34 carbide teeth on a 24 inch wheel
Forged 42CrMo holders keep every tooth locked in under shock loads, and each tooth swaps out on its own.
Specifications and what is included
The SG24 3-Point PTO Stump Grinder turns any 15 - 45 HP tractor into a stump removal machine. A 24 inch solid steel flywheel with 34 tungsten carbide teeth chews a hardwood stump down to 6 inches below grade in minutes, so the ground is ready for grading, seeding or replanting the same day. The 1-3/8 in 6-spline PTO shaft with slip clutch is included and hooks up to a 540 RPM PTO in a couple of minutes.
Stop renting a stump grinder every spring. Bolt the SG24 to the tractor you already own. Brand new, crated, and delivered free by freight to the contiguous 48 states.
What's in the crate
- Brand-new SG24 3-point PTO stump grinder, Cat. 1 hitch (quick-attach compatible)
- 24 in x 3/4 in solid steel flywheel with 34 YG11C carbide teeth fitted
- PTO shaft, 1-3/8 in 6-spline with slip clutch, 540 RPM
- Integrated stabilizing legs
- On-unit chainsaw holder
- Tool and manual bucket with everything needed for installation
- Iron frame and carton packing, freight preparation for U.S. delivery
Why it wins
- 24 in flywheel. A large, 3/4 in thick solid steel grinding wheel carries the momentum to keep cutting through knots and roots without stalling.
- 34 tungsten carbide teeth. YG11C carbide tips in forged 42CrMo holders cut fast, stay sharp and are replaced one at a time when they finally wear.
- PTO shaft with slip clutch included. The 1-3/8 in 6-spline shaft protects your tractor's PTO from shock loads when a tooth hits rock.
- Built for 15 - 45 HP tractors. Sized for sub-compact and compact tractors, with a max torque rating of 1,200 Nm.
- Cat. 1 3-point hitch. The rigid 3-point connection keeps the grinder stable under load and improves grinding efficiency. Quick-attach compatible.
- Grinds 6 in below grade. Removes the root crown deep underground, not just the stump above the surface.
- Chainsaw holder and tool bucket. The saw rides on the grinder, and the manual and hardware live in the on-unit bucket.
- Integrated stabilizing legs. The grinder stands level in storage and lines up for a one-person hookup.
In the field
- Pasture and fence-line clearing - take out the stumps that bend the bush hog and snag the fence stretcher.
- Orchards and tree farms - remove dead trees flush and replant in the same row.
- Homeowners on acreage - clear a lot for a shop, barn or driveway without a rental or a contractor.
- Landscapers and tree services - a tractor-mounted grinder that goes to every job with the tractor.
- Storm cleanup - grind the stumps left after the chainsaw work is done.
Specifications
| Cutting | |
|---|---|
| Flywheel diameter | 24 in |
| Flywheel thickness | 3/4 in |
| Carbide tips | 34 pcs, YG11C material |
| Tip holder material | 42CrMo forged alloy |
| Cutting depth | 6 in below grade |
| Drive and mounting | |
| PTO HP required | 15 - 45 HP |
| PTO input | 540 RPM |
| Max torque | 1,200 Nm |
| Mounting | 3-point hitch Cat. 1, quick-attach compatible |
| PTO shaft | 1-3/8 in 6-spline with slip clutch, included |
| Size and weight | |
| Dimensions | 39 x 30 x 32 in |
| Weight (net / gross) | 450 / 569 lb |
| PTO shaft weight | 44 lb |
| Packing | Iron frame + carton |
| Warranty | 1 year |
What's in the crate, and how it gets to you
In the crate
- 1 x SG24 3-point PTO stump grinder, Cat. 1 hitch
- 24 in x 3/4 in flywheel with 34 YG11C carbide teeth fitted
- 1 x PTO shaft, 1-3/8 in 6-spline with slip clutch
- Integrated stabilizing legs and on-unit chainsaw holder
- Tool and manual bucket with installation hardware
- Iron frame and carton packing, curbside freight delivery included
Shipping
Every machine ships strapped inside a timber crate on a flatbed by LTL freight. The carrier calls ahead to book a curbside delivery appointment. Freight is on us - you uncrate, fuel it and go to work.
Shipping, returns and warranty
Shipping and delivery
Returns
Warranty and support
Payment and financing
Do I need a licence or a special trailer?
How do I track my order?
What owners say about this machine
"Went through five pine stumps from 16 to 28 inches in no time. Mounted on my 25 HP tractor in ten minutes and the slip clutch has saved the PTO twice."
"Arrived quickly, well packaged and as promised. Quality, well-built machine. Grinds fast and deep and the teeth still look new after a dozen stumps."
"Same quality as the big names at a better price, and with better support. Easy to haul, easy to hook up and the PTO shaft just runs."
Owner feedback collected by IronPeak. Names shortened at the owner's request.
No tractor? No problem.
SGR1500 15 HP Walk-Behind Stump Grinder - 420cc Gas, 12 in Carbide Wheel, No Tractor Needed
The SGR1500 is the self-powered walk-behind stump grinder with its own 420cc 15 HP gas engine, a 12 inch carbide wheel and a towable frame.
$699.00 today instead of $1,399.00
Free freight, the PTO shaft, chainsaw holder and tool bucket, a 1-year warranty and a support line that picks up. Limited stock at this price.