SGR1500 15 HP Walk-Behind Stump Grinder - 420cc Gas, 12 in Carbide Wheel, No Tractor Needed
No tractor, no PTO, no rental. A 420cc 15 HP gas engine drives a 12 inch carbide cutting wheel through Kevlar belts, cutting 12 inches above grade and 10 inches below. Tubeless tires and a drum brake move it from stump to stump.
- 420cc 15 HP single-cylinder OHV gas engine, recoil start
- 12 in cutting wheel with 8 YG11C carbide tips
- Cuts 12 in above grade and 10 in below
- Kevlar V-belt drive with centrifugal clutch
- Towable frame, tubeless tires, drum brake
- EPA Phase III and CARB Phase III certified
The numbers that matter
Built to work, priced to own.
Six reasons the SGR1500 is the stump grinder property owners keep instead of renting.
12 inch carbide wheel
Eight YG11C carbide tips in forged 42CrMo holders chew through hardwood stumps and buried roots without stalling.
420cc 15 HP engine
Single-cylinder, 4-stroke, air-cooled OHV power with recoil start. Fuel up, pull the cord and grind.
Kevlar V-belt drive
Two Kevlar V-belts and a centrifugal clutch give smooth engagement and a long service life between belt changes.
Deep and high cutting range
12 inches above ground and 10 inches below grade, so the whole stump and its root crown disappear.
Towable frame with drum brake
145/70-6 tubeless tires, a 10 inch front wheel and a drum brake make moving between stumps easy and park it safely on a slope.
Certified for all 50 states
EPA Phase III and CARB Phase III compliant engine, legal to run anywhere in the U.S.
Real work, real jobsites.
420cc OHV, recoil start
A simple air-cooled single-cylinder engine with pump-gas service intervals and parts at any small-engine shop.
12 inch wheel, 8 carbide tips
Forged 42CrMo holders keep every carbide tip locked in place under heavy shock loads, and each tip replaces on its own.
Tubeless tires and a drum brake
Roll it off the trailer, wheel it to the stump and set the brake on a slope while you grind.
Specifications and what is included
The SGR1500 is the stump grinder for properties without a tractor. A 420cc 15 HP gasoline engine drives a 12 inch cutting wheel with 8 YG11C carbide teeth through two Kevlar V-belts and a centrifugal clutch. It cuts 12 inches above grade and 10 inches below, so the whole stump and its root crown disappear. Tubeless tires, a 10 in front wheel and a drum brake make it easy to roll from stump to stump or tow across the property.
No tractor, no PTO, no rental. Fuel it, pull the cord and grind. Brand new, crated, and delivered free by freight to the contiguous 48 states.
What's in the crate
- Brand-new SGR1500 walk-behind stump root grinder
- 420cc 15 HP single-cylinder 4-stroke OHV gasoline engine, recoil start, EPA Phase III and CARB Phase III certified
- 12 in x 0.47 in cutting wheel with 8 YG11C carbide tips in 42CrMo holders, fitted
- 2 x Kevlar V-belts and centrifugal clutch, fitted
- Towable frame with 145/70-6 tubeless tires, 10 in front wheel and drum brake
- Operator's manual and tool kit; freight preparation for U.S. delivery
Why it wins
- 12 in carbide cutting wheel. Eight YG11C carbide tips chew through hardwood stumps and buried roots without stalling.
- 420cc 15 HP engine. Single-cylinder, 4-stroke, air-cooled OHV power with recoil start. Fuel up and go, no tractor required.
- 42CrMo tip holders. Forged alloy holders keep every carbide tip locked in place under heavy shock loads.
- Kevlar V-belt drive. Two Kevlar V-belts and a centrifugal clutch give smooth engagement and a long service life.
- Towable chassis with drum brake. Tubeless tires, a 10 in front wheel and a drum brake make moving between stumps easy and park it safely on a slope.
- Deep and high cutting range. 12 in above ground and 10 in below grade so the stump is gone, not just trimmed.
- EPA and CARB certified. Legal to sell and run in all 50 states.
In the field
- Homeowners - remove the stumps in the yard without renting a machine or hiring a tree service.
- Tree services and landscapers - a grinder that rolls off the trailer and through a 32 in gate.
- Acreage and hobby farms - clear a fence line or a pasture edge stump by stump.
- Rental fleets - simple gas engine, belt drive and replaceable teeth keep it in service.
- Storm cleanup - finish the job after the chainsaw crew leaves.
Specifications
| Engine | |
|---|---|
| Engine | 420cc, 15 HP |
| Engine type | Single cylinder, 4-stroke, air-cooled, OHV |
| Start | Recoil |
| Certifications | EPA Phase III, CARB Phase III |
| Cutting | |
| Cutting wheel diameter | 12 in |
| Cutting wheel thickness | 0.47 in |
| Carbide tips | 8 pcs, YG11C alloy |
| Tip holder material | 42CrMo |
| Cutting height | 12 in above ground |
| Cutting depth | 10 in below ground |
| Drive and chassis | |
| Belts | 2 x Kevlar V-belts |
| Clutch | Centrifugal clutch |
| Brake | Drum brake |
| Tires | 145/70-6 tubeless, 10 in front wheel |
| Max towing speed | Off-road only, 15 mph max |
| Size and weight | |
| Weight (net / gross) | 265 / 320 lb |
| Packing size | 41 x 28 x 26 in |
| Warranty | 1 year |
What's in the crate, and how it gets to you
In the crate
- 1 x SGR1500 walk-behind stump root grinder
- 420cc 15 HP OHV gas engine, recoil start, EPA and CARB certified
- 12 in x 0.47 in cutting wheel with 8 YG11C carbide tips fitted
- 2 x Kevlar V-belts and centrifugal clutch fitted
- Towable frame with 145/70-6 tubeless tires, 10 in front wheel and drum brake
- Operator's manual and tool kit, curbside freight delivery included
Shipping
Every machine ships strapped inside a timber crate on a flatbed by LTL freight. The carrier calls ahead to book a curbside delivery appointment. Freight is on us - you uncrate, fuel it and go to work.
Shipping, returns and warranty
Shipping and delivery
Returns
Warranty and support
Payment and financing
Do I need a licence or a special trailer?
How do I track my order?
What owners say about this machine
"Took out nine maple stumps in an afternoon. Way easier than borrowing a tractor and the carbide teeth still look new."
"Recoil start fires on the second pull. Rolls right off the trailer and the drum brake keeps it parked on a slope."
"Priced way below the rental route and it grinds deeper than the unit I used to rent. Great little machine."
Owner feedback collected by IronPeak. Names shortened at the owner's request.
$1,100.00 today instead of $1,799.00
Free freight, the Kevlar belt drive and towable frame, a 1-year warranty and a support line that picks up. Limited stock at this price.